Bob L. Herd Department of Petroleum Engineering

About the Department
Program Offerings, Course Descriptions & Curricular Tables

Marshall Watson, Ph.D., Chairperson

George P. Livermore Professor: Soliman
Professors: Heinze, Hussain
Associate Professors: Menouar, Sheng, Watson
Assistant Professors: Emadibaladehi, Ettehadtavakkol, Panacharoensawad
Instructors: Bullard, Gamadi, Giussani

CONTACT INFORMATION: 210 Petroleum Engineering Building, Box 43111, Lubbock, TX 79409-3111, T 806.742.3573, F 806.742.3502, www.depts.ttu.edu/pe

About the Department

In 2014 the department moved into the new 42,000 square-foot Terry Fuller Petroleum Engineering Research Building.

This department supervises the following degree programs and certificate:

Bachelor of Science in Petroleum Engineering
Master of Science in Petroleum Engineering
Doctor of Philosophy in Petroleum Engineering

Mission. The mission of the Bob L. Herd Department of Petroleum Engineering has three elements:

To provide excellent instruction and design experiences essential for graduates to enter the practice of petroleum engineering and pursue life-long professional development.
To conduct research that generates, communicates, and applies new knowledge for the betterment of society.
To foster a spirit of service and leadership among students and faculty and assist the public in addressing issues concerning the use of resources, protection of the environment, and development of infrastructures.
The department fulfills an obligation to the people of the state of Texas and the nation in making available the technical expertise for the safe and efficient development, production, and management of petroleum reserves.

Program Educational Objectives. The undergraduate program educational objectives embody the expected accomplishments of graduates during their first few years following graduation. The program educational objectives of the Bob L. Herd Department of Petroleum Engineering (PE) as adopted by the PE faculty, students, and Industry Advisor Board are as follows:

Be successful in diverse career paths in the petroleum industry.
Continue professional development through participation and leadership in professional organizations (SPE, ASEE, API, AADE, SPWLA).
Pursue lifelong learning through continuing education or postgraduate education (professional meetings, short courses, graduate courses).
Progress to professional licensure so that some individuals graduate from an ABET-accredited degree plan, pass the Fundamentals of Engineering Exam, work in increasingly responsible engineering positions, and pass the Professional Exam.

These objectives are published in the university’s catalog and on the Bob L. Herd Department of Petroleum Engineering website.

Student Outcomes. Student outcomes are statements of the expectations for the knowledge and skills that students should possess when they graduate with a Bachelor of Science in Petroleum Engineering from Texas Tech University.

Graduates of the program must demonstrate the following:

An ability to apply knowledge of mathematics, science, and engineering.
An ability to design and conduct experiments, as well as to analyze and interpret data.
An ability to design a system, component, or process to meet desired needs within realistic constraints such as economic, environmental, social, political, ethical, health and safety, manufacturability, and sustainability.
An ability to function on multidisciplinary teams.
An ability to identify, formulate, and solve engineering problems.
An understanding of professional and ethical responsibility.
An ability to communicate effectively.
The broad education necessary to understand the impact of engineering solutions in a global, economic, environmental, and societal context.
A recognition of the need for, and an ability to engage in life-long learning.
A knowledge of contemporary issues.
An ability to use the techniques, skills, and modern engineering tools necessary for engineering practice.

Program Overview. The department is uniquely located in the Permian Basin, where approximately 22 percent of the nation’s petroleum resources and 68 percent of Texas’ petroleum resources lie within a 175-mile radius.

Petroleum engineering is the practical application of the basic and physical sciences of mathematics, geology, physics, and chemistry and all of the engineering sciences to the discovery, development, production, and transportation of petroleum. Petroleum is the most widely used form of mobile energy and now supplies approximately three-fourths of the total energy used in the United States. It is also a major raw material from which a wide variety of products are manufactured.

The department strongly encourages students to experience at least one summer internship for professional growth. Intern students will be assessed externally. The department has conferred over 2,800 B.S. degrees since the program’s inception in 1946.

The department is heavily involved in assisting students to find employment—both summer internships and full-time positions—upon graduation. An interview and resume workshop for the fall and spring semesters is conducted through the dean’s office to assist students with interviewing and resume writing skills as an additional effort to maintain petroleum engineering’s outstanding placement rate through the Dean’s office. The curriculum is under continuous review, and revisions are made as needed to maintain accreditation and ensure employability of students. Faculty participation with ABET and the SPE Education and Accreditation Committee ensure the department is current on engineering education. In addition, faculty have attended and been principal planners in all nine of the Colloquiums on Petroleum Engineering Education. Changes in the petroleum engineering curriculum since 1991 have been implemented by the Petroleum Engineering Curriculum Committee after due consideration of input fromthe Petroleum Industry Advisory Board, ABET recommendations, and the department’s planning and assessment tools.

The department assists students to obtain summer internships. This provides invaluable and highly recommended industry experience to students. The increasing department involvement in industrial research provides an opportunity for undergraduate students to participate actively in the research experience on campus.

The Bachelor of Science in Petroleum Engineering is accredited by the Engineering Accreditation Commission of ABET, www.abet.org.

Undergraduate Program

General Standards and Requirements. Admission requirements and academic standards for the Department of Petroleum Engineering are consistent with the dynamic enrollment plan for the Edward E. Whitacre, Jr. College of Engineering. Refer to the introduction to the Whitacre College of Engineering section of this catalog for a description of the criteria for initial admission to the Whitacre College of Engineering and the lower-division foundational curriculum. The required foundational curriculum for petroleum engineering consists of ENGL 1301 , ENGL 1302 ; MATH 1451 , MATH 1452 ; CHEM 1307 , CHEM 1107 ; PHYS 1408 ; PETR 1305 or ENGR 1315 .

Admission to the petroleum engineering upper-division degree program is very competitive. Consequently, only 250 students in any academic year will be allowed to transition from the lower-division foundational program to the upper-division petroleum degree program, no later than between the third and fourth semesters. The 250-student limit to the petroleum engineering degree program will be effective Spring 2016 and thereafter. Thus, the admission change will affect students entering Texas Tech in Fall 2014 and after, and those students who entered prior to Fall 2014 but have not successfully transitioned into the upper-division degree program.

To apply for admission in the petroleum engineering upper-division degree program (beginning with PETR 2322 and PETR 3302 ), students must meet ALL of the following requirements:

completion of the foundational curriculum.
completion of 12 credit hours of Texas Tech University coursework.
minimum institutional GPA of 3.4.
completion of first three semesters of the petroleum engineering curriculum.

Students meeting all three of the required criteria will be considered for admission to the petroleum engineering program based on their institutional GPA. Where necessary to distinguish among students, math, science and engineering coursework GPAs will be weighted higher than other courses in the core or foundational curriculum. Once the enrollment cap of 250 has been reached for any given academic year, no additional students will be admitted to the petroleum engineering upper-division program for that year. Students meeting all three of the required criteria who are not among the 250 admitted students may declare majors in any other department in the college of engineering, provided standards for those majors are met. To apply to the petroleum degree program, students must complete the Authorization for Transfer into Upper Division Degree Program form. Students may complete an electronic copy of the form, located on the college of engineering website, or complete the paper copy located in the Engineering Opportunities Center of the college of engineering Dean’s Office. Entry requirements for the petroleum engineering degree program are subject to change and students must meet the requirements at the time of submitting the Authorization for Transfer into Upper Division Degree Program form.

Upon acceptance into the upper-division petroleum degree program students will be placed on the most current catalog and upperdivision degree plan to fulfill graduation requirements in place at that time.

A high-priority goal is to produce quality B.S. graduates measured by the following:

Student average starting salaries near the top of the national average in accredited U.S. petroleum engineering departments.
Provide summer intern opportunities and experiences within the industry.
Recruitment of quality undergraduates.
ABET accreditation.
Petroleum Industry Advisory Board recommendation on curriculum and graduates.
An independent assessment of capstone senior courses.

All students in the department are required to have a Windows-based laptop computer, safety glasses, and steel-toed boots. Many instructors require students to transfer homework via email. Some instructors transfer information to students using the Internet. Students should check the department website for hardware and software recommendations; most petroleum-based software applications will run only on Windows-based PCs. The department has laptop accessible classrooms. Computer labs are not provided.

The academic standards required by the Whitacre College of Engineering and the Bob L. Herd Department of Petroleum Engineering are given in the introduction to the Whitacre College section of this catalog and summarized below. Exceptions to these academic standards are at the discretion of the petroleum engineering faculty in concurrence with the dean of the Whitacre College of Engineering. The standards are as follows:

A grade of C or better must be achieved in all prerequisites before the subsequent course may be attempted.
A minimum 2.5 GPA is required to maintain academic good standing and continued membership in the Whitacre College of Engineering.
A full-time student must achieve a C or better in 18 credit hours of coursework in the degree plan in each 12-month period.
An engineering course may be repeated only one time after a course drop, withdrawal, or failure to achieve a C or higher.
A maximum of three engineering courses may be repeated.

The department requires students in their junior year to conduct a degree audit. Following this audit, they must meet with their academic advisors to discuss all courses remaining for completion of their degree. Students must select “operations” or “reservoir” concentration upon registration for fall (first semester senior) courses. The student will be expected to enroll only in courses within their designated concentration. To graduate, the student must complete the required concentration courses.

Curriculum. Petroleum engineering applies the curriculum management of the Whitacre College of Engineering. Because of the rigidity of the upper-division petroleum degree program, students should be aware of the implications of not successfully completing coursework as prescribed in the degree plan.

Per the Academic Advising and Support section of this catalog, students should “notify their advisor immediately when receiving a course grade of D or F,” before dropping a course, or when withdrawing from the university in order to gain a full understanding of the implications and develop a plan for the future.

Minors. Currently, petroleum engineering does not offer a minor. In conjunction with the Bachelor of Science in Petroleum Engineering degree, students may declare a minor (18 hours in a subject) in a field of their choice. Any required or elective courses in petroleum engineering may be applied toward the minor with the approval of the minor department (and department advisor). While declaration of a minor is not required, it is strongly recommended. Suggested minors are, but not limited to, mechanical engineering, geosciences, and mathematics. These minors can be earned with some additional hours.

Graduate Program

For information on graduate programs offered by the Department of Petroleum Engineering, visit the Graduate School section of the catalog.

Program Offerings & Course Descriptions

Programs

Bachelor’s

Petroleum Engineering, B.S.

Undergraduate Minor

Petroleum Engineering, Undergraduate Minor

Accelerated Bachelor’s to Master’s Degree

Petroleum Engineering, B.S. / M.S.P.E.

Courses

Petroleum Engineering (Undergraduate Courses)